Category: 5908-62-3

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid,below Introduce a new synthetic route., 7025-19-6

To a solution of compound from example 308 (50 mg, 0.10 mmol) in DMF (0.5 mL), 1,1-Dioxoisothiazolidine (18.3 mg, 0.15 mmol) was added followed by K2C03 (14 mg, 0.1 mmol) and stirred at 50 C. o/n. The crude waspurified on prep-HPLC (C-18, Acetonitrile/water) to give the title compound (16 mg, 26%) as a white solid. ESI-MS rnlz=617.25, 619.25 [M-Hr.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 5908-62-3

Reference£º
Patent; ENANTA PHARMACEUTICALS, INC.; Qiu, Yao-Ling; Gao, Xuri; Kass, Jorden; Cao, Hui; Li, Wei; Peng, Xiaowen; Suh, Byung-Chul; Or, Yat Sun; US2019/60258; (2019); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.5908-62-3, name is 1,1-Dioxo-isothiazolidine, introduce a new downstream synthesis route. , 5908-62-3

108371 To a solution of isothiazolidine 1,1-dioxide (500 mg, 4.13 mmol) in acetonitrile (10 mL) was added potassium carbonate (1.14 g, 8.25 mmol), 4-methoxybenzyl chloride (646 mg, 4.13 mmol). The mixture was heated to 80 C for 12 h under nitrogen atmosphere. The mixture was poured into H20 (50 mL) and extracted with ethyl acetate (50 mL). The organic layer was washed with H20 (50 mL x 2) and saturated brine solution (50 mL). The organic layers was dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The residue was purified via flash silica chromatography (solvent gradient: 0-40% ethyl acetate in petroleum ether) to yield 1.0 g (99% yield) of the title compound as a white solid. ?H NMR (400 MHz, CDC13) oe 7.28 (d, J= 8.4 Hz, 2H), 9.89 (d, J= 8.8 Hz, 2H), 4.13 (s, 2H), 3.82 (s, 3H), 3.23 – 3.18 (t,J= 8.8 Hz, 2H), 3.12-3.07 (m, 2H), 2.34-2.25 (m, 2H)., 5908-62-3

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 5908-62-3, you can also browse my other articles.

Reference£º
Patent; GENENTECH, INC.; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; BRAUN, Marie-Gabrielle; GIBBONS, Paul; LEE, Wendy; LY, Cuong; RUDOLPH, Joachim; SCHWARZ, Jacob; ASHKENAZI, Avi; FU, Leo; LAI, Tommy; WANG, Fei; BEVERIDGE, Ramsay; ZHAO, Liang; (652 pag.)WO2018/166528; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

To a mixture of Cs2C03(41 mg, 0.12 mmol), 5-(5-(4-bromophenyl)- l,2,4-oxadiazol-3-yl)-l-(3-(2-methoxyethoxy)benzyl)pyridin-2(lH)-one(synthesized with analogous method to Example 65, using 4-bromobenzoic acid instead of 4-(trifluoromethoxy)benzoic acid; 30 mg, 0.062 mmol), Pd2(dba)3 (0.6 mg, 0.62 muiotaetaomicron), and XPhos (1.1 mg, 2.5 muiotaetaomicron) in toluene (311 muEpsilon) previously degassed with N2, was added isothiazolidine 1,1 -dioxide (6.4 mu, 0.075 mmol). The mixture was heated to 80 C for 12 h, cooled to RT, filtered through a pad Celite and concentrated under reduced pressure. The residue was purified by prep-HPLC (Mobile phase: A = 0.1% TFA/H20, B = 0.1% TFA/ MeCN; Gradient: B = 30% – 70% in 12 min; Column: CI 8) to give the title compound; H NMR (600 MHz, Chloroform-if) delta 8.25 (d, J = 2.4 Hz, IH), 8.13 (d, J = 8.8 Hz, 2H), 8.04 (dd, J = 9.5, 2.4 Hz, IH), 7.35 (d, / = 8.8 Hz, 2H), 7.28 (m, IH), 6.95 (d, / = 8.0 Hz, IH), 6.93 (m, IH), 6.88 (dd, / = 8.1, 2.4 Hz, IH), 6.77 (d, / = 9.5 Hz, IH), 5.22 (s, 2H), 4.14 – 4.04 (m, 2H), 3.87 (t, / = 6.5 Hz, 2H), 3.79 – 3.68 (m, 2H), 3.46 – 3.43 (m, 2H), 3.43 (s, 3H), 2.67 – 2.56 (m, 2H); MS (ES+) C26H26N406S requires: 522, found: 523 [M+H]+

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,1-Dioxo-isothiazolidine, you can also browse my other articles.

Reference£º
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; MARSZALEK, Joe; LIU, Gang; KANG, Zhijun; CARROLL, Christopher, L.; MCAFOOS, Timothy; CZAKO, Barbara; WO2014/31928; (2014); A2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

1438-16-0, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1438-16-0, name is 3-Aminorhodanine. Here is a downstream synthesis route of the compound 1438-16-0

5908-62-3, Example 9 Preparation of Intermediate 11 [0449] [0450] To an oven dried 50 mL round-bottom flask, methyl 2-bromo-5-methylbenzoate (352 mg, 1.54 mmol), sultam (236 mg, 1.95 mmol), cesium carbonate (732 mg, 2.25 mmol), palladium acetate (40.4 mg, 0.18 mmol), and Xanphos (136 mg, 0.235 mmol) were added and flask was placed under argon. Reagents were suspended in 8 mL of anhydrous dioxane and mixture was heated at 100 C. overnight. After cooling to room temperature, reaction mixture was filtered, washing with ethyl acetate. Combined filtrate was concentrated under reduced pressure and resulting film was purified by silica gel column chromatography (25-100% Ethyl Acetate in Hexanes) to yield intermediate 11. [0451] 1H-NMR (DMSO, 400 MHz): delta 7.75 (d, 1H), 7.44 (m, 1H), 7.35 (m, 1H), 3.89 (s, 3H), 3.81 (t, 2H), 3.28 (t, 2H), 2.55 (m, 2H), 2.39 (s, 3H). [0452] LCMS m/z [M+H]+C12H15NO4S requires: 270.07. Found 270.12.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,1-Dioxo-isothiazolidine, you can also browse my other articles.

Reference£º
Patent; GILEAD SCIENCES, INC.; Boojamra, Constantine G.; Hui, Hon Chung; Jansa, Petr; Mackman, Richard L.; Parrish, Jay P.; Sangi, Michael; Siegel, Dustin; Sperandio, David; Yang, Hai; US2013/164280; (2013); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

Example 10.Lambdar-[(2,6-Dimethylphenyl)methyl]-6-(l,l-dioxido-2-isothiazolidinyl)-2,3- dimethylimidazo[l,2-alpha]pyridin-8-amine hydrochlorideA mixture of 6-bromo-N-[(2,6-dimethylphenyl)methyl]-2,3-dimethylimidazo[ 1 ,2- alpha]pyridin-8-amine (100 mg, 0.28 mmol; WO 98/37080), isothiazolidine 1,1 -dioxide (67 mg, 0.56 mmol; WO 04/050619), copper(I) iodide (16 mg, 0.083 mmol), potassium carbonate (138 mg, 1.0 mmol) and N,N’-dimethylethylenediamine (7.4 mg, 0.083mmol) in dioxane (2 mL) was heated in an Initiator Microwave Synthesizer at 14O0C for 12 hours. The cooled mixture was applied to an Isolute SCX cartridge. Elution with methanol, followed by water, then methanol then IM NH3 in methanol gave, after evaporation, the product which was further purified by chromatography on EPO silica gel. Elution with dichloromethane/methanol (0 to 10%) gave a pale yellow solid which was dissolved in dichloromethane (2 mL), Ethereal HCl (IM; LOmL) was added and the solvent evaporated. The residue was triturated under ether (1 mL) and filtered to give the title compound as a colourless solid; MS (ES+ve): [M+H]+ at m/z 399 (C2IH26N4O2S requires [M+H]+ at m/z 399).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 5908-62-3, you can also browse my other articles.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2007/3386; (2007); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5908-62-3, name is 1,1-Dioxo-isothiazolidine. An updated downstream synthesis route of 5908-62-3 as follows., 5908-62-3

5908-62-3, Intermediate 7 (0.088 g, 0.087 mmol) was combined with isothiazolidine 1,1-dioxide (0.105 g, 0.866 mmol) in anhydrous dichloromethane (0.87 mE). paraToluenesulfonic acid monohydrate (1.647 mg, 8.66 tmol) was added. The reaction was stirred at room temperature for 30 minutes.10517] The entire reaction mixture was purified by normal phase flash column chromatography (0-60% acetonitriledichloromethane, gradient elution, 12 g silica column, TEC in 30% acetonitrile-dichloromethane) to give Example 19 (0.020 g, 0.017 mmol, 19.9% yield) as a white solid.Example 1910518] ESIMS [M+NH4] 1123.0, [M-H] 1104.0.10519] HRMS: Calculated for ammonium adductC58H92N20165NH4-1122.6511; found 1122.652.10520] ?H NMR (600 MHz, Chloroform-d) oe 6.45 (dd,J=14.7, 10.9 Hz, 1H), 6.22 (dd, J=14.7, 10.7 Hz, 1H), 6.13(dd, J=14.9, 10.6 Hz, 1H), 5.99 (d, J=10.9 Hz, 1H), 5.35 (dd,J=14.9, 9.8 Hz, 1H), 5.21 (d, J=5.8 Hz, 1H), 5.10 (d, J=9.9Hz, 1H), 4.73 (ddd, J=11.0, 9.2, 4.7 Hz, 1H), 4.69 (d, J=12.4Hz, 1H), 4.64 (m, 1H), 4.49 (s, 1H), 4.13 (d, J=6.5 Hz, 1H),3.97 (t, J=11.3 Hz, 1H), 3.84 (dd, J=18.5, 11.4 Hz, 2H),3.78-3.69 (m, 2H), 3.64 (m, 2H), 3.56 (td, J=13.5, 3.0 Hz,1H), 3.43-3.31 (m, 4H), 3.28 (m, 3H), 3.26-3.17 (m, 2H),3.12-2.92 (m, 3H), 2.76-2.68 (m, 1H), 2.45-2.34 (m, 1H),2.31-2.21 (m, 3H), 2.20-2.10 (m, 3H), 2.06 (m, 1H), 1.87(m, 4H), 1.75 (m, 3H), 1.71-1.59 (m, 3H), 1.60 (s, 3H),1.60-1.50 (m, 1H), 1.48-1.39 (m, 1H), 1.42-1.31 (m, 2H),1.33-1.20 (m, 8H), 1.11 (s, 3H), 1.11-1.05 (m, 2H), 1.03 (dd,J=18.2, 6.6 Hz, 6H), 0.99-0.82 (m, 1OH), 0.79 (q, J=12.0 Hz,1H).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1,1-Dioxo-isothiazolidine

Reference£º
Patent; NOVARTIS AG; BONAZZI, Simone; CONNOLLY, Michael; GLASS, David Jonathan; MIHALIC, Manuel; PATTERSON, Andrew William; ROGGO, Silvio; SHAVLAKADZE, Tea; (68 pag.)US2019/92788; (2019); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

26364-65-8, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine, below Introduce a new synthetic route.

5908-62-3, To an oven dried 50 mE round-bottom flask, methyl2-bromo-5-methylbeioate (352 mg, 1.54 mmol), sultam(236 mg, 1.95 mmol), cesium carbonate (732 mg, 2.25mmol), palladium acetate (40.4 mg, 0.18 mmol), and Xanphos (136 mg, 0.23 5 mmol) were added and flask was placedunder argon. Reagents were suspended in 8 mE of anhydrousdioxane and mixture was heated at 100 C. overnight. Aftercooling to room temperature, reaction mixture was filtered,was1ng with ethyl acetate. Combined filtrate was concen446.04trated under reduced pressure and resulting film was purifiedby silica gel column chromatography (25-100% EthylAcetate in Hexanes) to yield intermediate 11.?H-NMR (DMSO, 400 MHz): oe 7.75 (d, 1H), 7.44 (m, 1H),7.35 (m, 1H), 3.89 (s, 3H), 3.81 (t, 2H), 3.28 (t, 2H), 2.55 (m,2H), 2.39 (s, 3H).ECMS m/z [M+H] C12H15N04S requires: 270.07. Found270.12.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1,1-Dioxo-isothiazolidine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Gilead Sciences, Inc.; Sangi, Michael; (125 pag.)US9278975; (2016); B2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1438-16-0, name is 3-Aminorhodanine. An updated downstream synthesis route of 1438-16-0 as follows., 1438-16-0

A mixture of 5-tert-butyl-7-chloro-3-(2-chlorobenzyl)-3H-[l,2,3]triazolo[4,5-d] pyrimidine (15.9 mg, 47.2 muiotaetaomicron?), 1,1-dioxo-isothiazolidine (11.4 mg, 94.4 muiotaetaomicron?) and DBU (14.2 mu?^, 94.4 mumol) in DMF (250 mu?) was stirred at the room temperature overnight. The reaction mixture was directly purified by preparative HPLC (column: Gemini 5um C18 110A 75 x 30mm. mobile phase: water (0.05% Et3N): acetonitrile 75:25% to 5:95%. WL: 230 nm Flow: 30 mL/min.) to afford the title compound as white solid (3.10 mg, 16%). MS(m/e): 387.3 (MH+).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1,1-Dioxo-isothiazolidine

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; ADAM, Jean-Michel; BISSANTZ, Caterina; GRETHER, Uwe; KIMBARA, Atsushi; NETTEKOVEN, Matthias; ROEVER, Stephan; ROGERS-EVANS, Mark; WO2013/68306; (2013); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

7025-19-6, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, below Introduce a new synthetic route.

To a solution of 3-iodo-N-(3,4,5-trifluorophenyl)-4,5,6,7-tetrahydropyrazolo[l,5- a]pyridine-5-carboxamide (compound lh, 20 mg, 0.048 mmol) in DMSO (1.0 mL) was added Cul (2 mg, 0.0095 mmol), K2C03 (7 mg, 0.095 mmol), N,N’-dimethyl-l,2-cyclohexanediamine (2 mg, 0.0095 mmol), and 1,2-thiazolidine 1,1-dioxide (compound 5a, 5 mg, 0.057 mmol). The reaction mixture was stirred at 110 C for 18 hours and then purified by flash chromatography and prep-HPLC to give 3-(l,l-dioxo-l,2-thiazolidin-2-yl)-N-(3,4,5-trifluorophenyl)-4,5,6,7- tetrahydropyrazolo[l,5-a]pyridine-5-carboxamide (Example 5, 11.5 mg) as a white solid. 1H NMR (400MHz, CDC13) delta 8.21 (s, 1H), 7.56 (s, 1H), 7.41 – 7.26 (m, 2H), 4.27 – 4.14 (m, 1H), 4.07 (m, 1H), 3.73 – 3.54 (m, 2H), 3.36 (t, 2H), 3.25 – 3.08 (m, 2H), 2.84 – 2.72 (m, 1H), 2.60 – 2.39 (m, 3H), 2.34 – 2.21 (m, 1H). MS obsd. (ESI+) [(M+H)+]: 415

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1,1-Dioxo-isothiazolidine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HU, Taishan; SHEN, Hong; HAN, Xingchun; (45 pag.)WO2018/11100; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.185137-29-5, name is (S)-4-Phenylthiazolidine-2-thione,below Introduce a new synthetic route., 185137-29-5

To a stirred solution of 3-bromo-9-fluoro-6-methanesulfonyl-5H-pyrido[3,2- bjindole (200 mg, 0.583 mmol) and isothiazolidine-l,l-dione (278 mg, 2.30 mmol) in NMP (2.40 mL) was added t-BuOK (203 mg, 1.81 mmol). This mixture was heated at 115 C for 11 h and cooled to room temperature. The mixture was diluted with EtOAc (20 mL) and 10% aq. LiCl solution (20 mL). Some insoluble solid was filtered to give the desired product, 2-(3-bromo-6-(methylsulfonyl)-5H-pyrido[3,2-b]indol-9- yl)isothiazolidine-l,l-dione (115 mg, 44%). NMR (400MHz, DMSO-de) delta 11.94 (br s, 1H), 8.72 (br s, 1H), 8.32 (br s, 1H), 8.04 (br d, J=7.6 Hz, 1H), 7.55 (br s, 1H), 4.22 (br s, 2H), 3.59 (br s, 2H), 3.39 (br s, 3H), 2.61 (br s, 2H). HPLC: RT=2.055 min (Chromolith ODS 4.6 x 50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 min containing 0.1 % TFA, 4 mL/min, monitoring at 220 nm); MS (ES): m/z= 444,1 ; 445.9 (Br pattern) [M+H]+.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; HAN, Wen-Ching; DEGNAN, Andrew P.; DESKUS, Jeffrey A.; GAVAI, Ashvinikumar V.; GILL, Patrice; SCHMITZ, William D.; STARRETT, John E., Jr.; (193 pag.)WO2016/183115; (2016); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com