Category: thiazolidine

2682-49-7, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.2682-49-7, name is Thiazolidin-2-one. An updated downstream synthesis route of 2682-49-7 as follows.

The above-prepared compound A29 and 1.1 equivalents of rhodamine 3-propionic acid were dissolved in ethanol, one equivalent of pyridine was added, and the reaction was carried out at 80 C. for 4 hours. After the reaction was completed, the mixture was cooled to room temperature to precipitate a yellow solid, which was filtered by suction and used as a filter cake. After washing with dilute hydrochloric acid, washing with water, infrared drying, and recrystallization from ethanol gave a yellow solid with a yield of 81%.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid if you are interested.

Reference£º
Patent; Guangdong University of Technology; Du Zhiyun; Li Penghui; Jiang Hong; Zhang Wenjin; Chen Huixiong; Dong Changzhi; Zheng Xi; Zhang Kun; (35 pag.)CN107698579; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1438-16-0, name is 3-Aminorhodanine. An updated downstream synthesis route of 1438-16-0 as follows., 1438-16-0

EXAMPLE 6 3-(4-Bromobutyl)-2,2-dimethyl-4-thiazolidinone A solution of 2,2-dimethyl-4-thiazolidinone (5.00 g) in DMF (30 ml) was added dropwise to a suspension of NaH (0.0419 mole, previously washed with hexane) in DMF (30 ml) under N2. The resultant mixture was stirred for 1 h, transferred to an addition funnel and added dropwise to a solution of 1,4-dibromobutane (18.10 g) in DMF (50 ml) over a period of 40 min. The resultant solution was heated at 70 C. under N2 for 120 hr. TLC analysis (silica gel, 10% EtOAc/CH2 Cl2) showed the presence of one major product and starting thiazolidinone. The reaction mixture was cooled to room temperature and poured into H2 O (400 ml), and the aqueous mixture extracted with EtOAc (3*175 ml). The combined extracts were washed with H2 O (200 ml) and brine (200 ml), dried over Na2 SO4, and concentrated in vacuo to an oily residue (20.44 g). The crude product was purified by HPLC (4% EtOAc/CH2 Cl2) to yield 5.91 g of oil. Distillation in vacuo afforded 4.61 g of a faint yellowish oil, bp 133-136 C./0.70 mm Hg. ANALYSIS: Calculated for C9 H16 BrNOS: 40.60% C; 6.06% H; 5.26% N. Found: 40.63% C; 6.03% H; 5.17% N., 2682-49-7

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2682-49-7, you can also browse my other articles.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Inc.; US4933453; (1990); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

General procedure: O-phenylenediamines (0.065 mol) was heated with N-aminorhodanine (0.065 mol) in xylene (50 ml) for 5 hours. The obtained residue was filtered and was crystallized from aqueous alcohol (charcoal). The obtained solid was recrystallized in ethanol., 1438-16-0

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1438-16-0, you can also browse my other articles.

Reference£º
Article; El Kihel; Ait Sir; Jebbari; Ahbala; Guesmi; Bauchat; Oriental Journal of Chemistry; vol. 32; 4; (2016); p. 1765 – 1768;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1438-16-0, name is 3-Aminorhodanine. Here is a downstream synthesis route of the compound 1438-16-0. 1438-16-0

Example 6-1 (Z)-3-(5-(2,5-dimethoxybenzylidene)-4-oxo-2-thioxothiazolidin-3-yl)propanoic acid 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (200 mg, 1 mmol), 2,5-dimethoxy benzaldehyde (168 mg, 1 mmol) and piperidine (0.3 mL) were combined in ethanol (3 mL) and irradiated in the microwave at 100 C. for 10 minutes. The reaction was cooled, the solid was collected by filtration, washed with ethyl acetate/hexanes (1/1) and recrystallized from ethanol to afford 85% yield of the title compound (309 mg, brown-orange solid). MS (M+H, 284); 1H NMR (400 MHz, DMSO-d6): delta, ppm: 2.57 (t, 2H)), 3.74 (s, J=6.8 Hz, 3H), 3.84 (s, 3H), 4.19 (t, 2H), 6.90 (s, 1H), 7.10 (s, 2H), 7.86 (s, 1H).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, you can also browse my other articles.

Reference£º
Patent; Senomyx, Inc.; US2009/274632; (2009); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

7025-19-6, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6

EXAMPLE 47 3-[(5-Methoxy-1,3-benzodithiol-2-ylidene)amino]-2-thioxo-4-thiazolidinone A slurry of 4.15 g of N-(5-methoxy-1,3-benzodithiol-2-ylidene)-N-methylbenzaminium iodide, N-aminorhodanine (1.48 g, 0.01 mole) and sodium carbonate (530 mg, 0.005 mole) in 100 ml of dimethylformamide is heated at 120 C for 2 hours. The reaction mixture is chilled in an ice bath and the resultant precipitate collected by filtration. The product is recrystallized from dimethylformamide to yield 2.23 g of the title compound, melting point 254-255 C. Anal. Calc’d. for C11 H8 N2 O2 S4: C, 40.23; H, 2.46; N, 8.53; S, 39.05. Found: C, 40.27; H, 2.37; N, 8.70; S, 38.83., 1438-16-0

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3-Aminorhodanine, you can also browse my other articles.

Reference£º
Patent; E. R. Squibb & Sons, Inc.; US4104467; (1978); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

2682-49-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.2682-49-7, name is Thiazolidin-2-one. Here is a downstream synthesis route of the compound 2682-49-7

General procedure: To a mixture of 5-chloroisatin (182 mg, 1.0 mmol) and N-carboxyethylrhodanine (205 mg, 1.0 mmol) was added DMSO-d6 (3.0 mL). The reaction was followed by proton NMR until the disappearance of the starting material.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, you can also browse my other articles.

Reference£º
Article; Xue, Fengtian; MacKerell Jr., Alexander D.; Heinzl, Geoffrey; Hom, Kellie; Tetrahedron Letters; vol. 54; 13; (2013); p. 1700 – 1703;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5908-62-3, name is 1,1-Dioxo-isothiazolidine. An updated downstream synthesis route of 5908-62-3 as follows., 5908-62-3

[0050] To a solution of 2-thiazolidinone (4.15 g, 40.18 mmol) in acetonitrile (60 ml) were added potassium carbonate (13.3 g 96.2 mmol), N,N-dimethyl-3-aminopropyl chloride hydrochloride (7.63 g, 48.3 mmol), and 18-crown-6 (catalytic amount). The mixture was refluxed for 18 hours, solvent removed in vacuo, then redissolved in dichloromethane and 1 M potassium chloride (40 ml each). The aqueous phase was isolated and extracted twice with 30 ml portions of dichloromethane. The combined organic fraction was washed with saturated sodium chloride (50 ml), dried over sodium sulfate, filtered, and dried in vacuo. The crude product was purified via silica gel chromatography, using a 10:1 ratio of silica gel A, 200-425 mesh, and eluting with 5% methanol in chloroform, yielding 1.15 g (15%) pure product.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2682-49-7, you can also browse my other articles.

Reference£º
Patent; Roberts, Jeannette C.; Wilmore, Britta H.; Cassidy, Pamela B.; Dominick, Pamela K.; Short, Megan D.; US2003/225255; (2003); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

26364-65-8, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine, below Introduce a new synthetic route.

1,2-thiazolidine 1,1-dioxide (0.031 g, 0.259 mmol) in dimethylformamide (1 mL) was treated with 60% sodium hydride (0.012g, 0.518 mmol, 0.021 g of a 60%> in oil dispersion). The reaction mixture was stirred for 5 min. To this solution was added Example 41b (0.05 g, 0.086 mmol). The reaction mixture was stirred at room temperature for 2 hours. 2 N NaOH (1 mL) was added and the reaction mixture was heated at 65 C for 2 hours. After cooling to room temperature, the reaction mixture was partitioned between water and ethyl acetate. The aqueous layer was extracted with additional ethyl acetate twice. The combined organic layers were washed with brine, dried over MgSC^, filtered, and concentrated. The residue was purified by preparative HPLC (CI 8, 10-80% acetonitrile in 0.1% TFA water) to afford 0.025 g (64%) of the title compound. 1H NMR (500 MHz, DMSO-d6) delta 2.21-2.25 (m, 2H), 3.15 (t, J=6.97 Hz, 2H), 3.23-3.27 (m, 2H), 3.50 (s, 3H), 4.13 (s, 2H), 6.25-6.26 (m, 1H), 6.88 (d, J=7.63 Hz, 2H), 7.00 (d, J=8.54 Hz, 1H), 7.03-7.05 (m, 1H), 7.25-7.30 (m, 4H), 7.34 (dd, J=8.39, 2.29, 1H), 7.48 (d, J=2.44 Hz, 1H), 12.00 (s, 1 H). MS (ESI+) m/z 450.2 (M+H)+.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1,1-Dioxo-isothiazolidine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; ABBVIE INC.; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; WANG, Le; PRATT, John K.; MCDANIEL, Keith F.; DAI, Yujia; FIDANZE, Steven D.; HASVOLD, Lisa; HOLMS, James H.; KATI, Warren M.; LIU, Dachun; MANTEI, Robert A.; MCCLELLAN, William J; SHEPPARD, George S.; WADA, Carol K.; WO2013/97601; (2013); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.185137-29-5, name is (S)-4-Phenylthiazolidine-2-thione. Here is a downstream synthesis route of the compound 185137-29-5. 185137-29-5

To a 500 ml three-necked flask, 38.1 g (0.3 mol) of 2-cyanoimino-1,3-thiazolidine, 82.8 g (0.6 mol) of potassium carbonate, 1.9 g (0.006 mol) of tetrabutylammonium bromide, and Water 220 g followed by the slow dropwise addition of 57.6 g (0.36 mol) of 2-chloro-5-chloromethylpyridine. The duration of the slow addition was 1.5 hours; the reaction was stirred at 60C for 2.5 hours.The reaction was completely detected, stirred and cooled to precipitate a large amount of solids, suction filtration, and cake was taken to obtain 68.8 g of thiacloprid with a purity of 96.5% and a yield of 88.2%; wherein the filtrate obtained by suction filtration (including water and catalyst) was obtained. Tetrabutylammonium bromide) is applied to the next batch of reactions (implementation)Example 6).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-Cyanoimino-1,3-thiazolidine, you can also browse my other articles.

Reference£º
Patent; Shanghai Sheng Nong Biochemical Goods Co., Ltd.; Ye Zhenjun; Geng Li; Fang Yan; Han Haiping; (6 pag.)CN107629045; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

26364-65-8, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine. An updated downstream synthesis route of 26364-65-8 as follows.

General procedure: Under N2 atmosphere, NaH (120 mg, 60% dispersion in mineral oil, 3 mmol)was added to a solution of thiazolidine-2-thione 2 (2.5 mmol) in 5 mL of THF and the resulting solution was cooled to 78C by a dry-ice-acetone bath. Propionyl chloride(255 mg, 2.5 mmol, 480 muL) was then dropped in. After removal of the solvent in vacuo,the residue was purified by column chromatography with a mixture of petroleum ether(60-90C)/EtOAc (5:1, v/v) as eluent., 185137-29-5

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about (S)-4-Phenylthiazolidine-2-thione if you are interested.

Reference£º
Article; Chen, Ning; Du, Hongguang; Liu, Weidong; Wang, Shanshan; Li, Xinyao; Xu, Jiaxi; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 190; 1; (2015); p. 112 – 122;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com