Heterocyclic Building Blocks-Thiazolidine

185137-29-5, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.185137-29-5, name is (S)-4-Phenylthiazolidine-2-thione. An updated downstream synthesis route of 185137-29-5 as follows.

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid if you are interested.

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, introduce a new downstream synthesis route. , 7025-19-6

To a solution of 6-(6-fluoro-4-iodo-2-pyridyl)-5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H- pyrido[4,3-d]pyrimidine (the product of step 1 in Example 96, 100 mg, 223 muiotaetaomicron) in dioxane ( 3mL) was added isothiazolidine-1,1-dioxide (54.1 mg, 446 muiotaetaomicron), cesium carbonate (145 mg, 446 muetaiotaomicron), Xantphos (25.8 mg, 44.6 muetaiotaomicron) and Pd(OAc)2(5.01 mg, 22.3 muetaiotaomicron). After being heated at 100 C with stirring for 20 hrs under argon, the resulting reaction mixture was then filtered and the filtrate was concentrated in vacuo. The residue was purified by prep-HPLC to give 2-[2-fluoro-6-(5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H-pyrido[4,3-d]pyrimidin-6-yl)-4- pyridyl]-1,2-thiazolidine-1,1-dioxide (8 mg) as a light yellow solid. 1H NMR (400MHz, DMSO- d6) delta ppm: 8.99 (d, 2H), 8.95 (s, 1H), 7.64 (t, 1H), 6.32 (s, 1H), 6.15 (s, 1H), 5.69-5.64 (m, 1H), 4.47-4.36 (m, 1H), 3.89 – 3.79 (m, 2H), 3.68-3.59(m, 2H), 3.54 – 3.43 (m, 1H), 3.14 – 2.98 (m, 2H), 2.42-2.37 (m, 2H), 1.52 (d, 3H). MS obsd (ESI) [(M+H)+]: 442.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 5908-62-3, you can also browse my other articles.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHENG, Zhanling; HAN, Xingchun; JIANG, Min; WANG, Jianhua; WANG, Yongguang; YANG, Song; (211 pag.)WO2018/1952; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5908-62-3, name is 1,1-Dioxo-isothiazolidine. An updated downstream synthesis route of 5908-62-3 as follows., 5908-62-3

General procedure: The suspension of 2-thioxo-1,3-thiazolidin-4-one (0.01 mol) 1a-40a in ethanol (50 mL) was mixed under stirring with a solution of aldehyde (0.011 mol) 1b-40b followed by the addition 3 drops of piperidine under the reflux conditions. The resulting mixture was heated under reflux until complete disappearance of 2-thioxo-1,3-thiazolidin-4-one, TLC control CH3OH – EtOAc 1:9. The reaction mixture was diluted with water (75 mL) and filtrated. The solid residue was recrystallized from a mixture of IPA/DMF.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid

Reference£º
Article; Volynets, Galyna P.; Bdzhola, Volodymyr G.; Golub, Andriy G.; Synyugin, Anatoliy R.; Chekanov, Maksym A.; Kukharenko, Oleksandr P.; Yarmoluk, Sergiy M.; European Journal of Medicinal Chemistry; vol. 61; (2013); p. 104 – 115;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

To a 500 ml three-necked flask, 38.1 g (0.3 mol) of 2-cyanoimino-1,3-thiazolidine, 82.8 g (0.6 mol) of potassium carbonate, 1.9 g (0.006 mol) of tetrabutylammonium bromide, and Water 220 g followed by the slow dropwise addition of 57.6 g (0.36 mol) of 2-chloro-5-chloromethylpyridine. The duration of the slow addition was 1.5 hours; the reaction was stirred at 60C for 2.5 hours.The reaction was completely detected, stirred and cooled to precipitate a large amount of solids, suction filtration, and cake was taken to obtain 68.8 g of thiacloprid with a purity of 96.5% and a yield of 88.2%; wherein the filtrate obtained by suction filtration (including water and catalyst) was obtained. Tetrabutylammonium bromide) is applied to the next batch of reactions (implementation)Example 6).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-Cyanoimino-1,3-thiazolidine, you can also browse my other articles.

Reference£º
Patent; Shanghai Sheng Nong Biochemical Goods Co., Ltd.; Ye Zhenjun; Geng Li; Fang Yan; Han Haiping; (6 pag.)CN107629045; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine. An updated downstream synthesis route of 26364-65-8 as follows., 26364-65-8

N-t-Butyloxycarbonylglutamine (2.0 g, 8.12 mmol) was dissolved in THF (5 mL) and cooled TO-15C. CAIBE (ISOBUTYLCHLOROFORMATE) (1.06 mL, 8.12 mmol) and 4- METHYLMORPHOLINE (0.895 mL, 8.12 mmol) were added and the solution stirred for 15 min, The formation of the mixed anhydride was checked by TLC (eluent: CHCL3/MEOH : 9/1). After warming to-10C another equivalent of 4-methylmorpholine (0.895 mL, 8.12 mmol) and THIAZOLIDINEHYDROCHLORIDE (1.02 g, 8. 12 mmol) was added. The mixture was brought to room temperature and stirred overnight. The sediment FORMED was filtered off and the solvent was evaporated. The resulting oil was taken up in chloroform (20 ml) and washed with a saturated solution of sodium hydrogensulfate followed by a saturated solution of sodium bicarbonate, water and brine. The organic layer was separated, dried and evaporated. The resulting product was checked for purity by TLC (eluent: CHC13/MEOH : 9/1). Yield: 1.64 g. A portion of this product (640 mg) was dissolved in 3.1 mL ice cold HCl in dioxane (12.98 M, 20 equivalents) and left on ice. The progress of the reaction was monitored by TLC (eluent: CHCL3/MEOH : 9/1). After completion of the reaction the solvent was removed and the resulting residue was taken up in methanol and evaporated again. The resulting oil was dried over phosphorous-V-oxide and triturated twice with diethylether to give the title compound (0.265 g). The purity was checked by HPLC. The identity of the reaction product was checked by NMR analysis.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about Thiazolidine hydrochloride

Reference£º
Patent; PROSIDION LTD.; WO2005/20983; (2005); A2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.14446-47-0, name is Thiazolidine hydrochloride. Here is a downstream synthesis route of the compound 14446-47-0. 14446-47-0

Example 3 N-[2-[4-(2,4-Dioxothiazolidin-5-ylmethyl)phenoxyacetylamino]-5-methoxyphenyl]-N-methylcarbamic Acid t-butyl Ester (Exemplification Compound Number 9-8) To a suspension at 0 C. of N-(2-amino-5-methoxyphenyl)-N-methylcarbamic acid t-butyl ester (4.2 g) and 4-(2,4-dioxothiazolidin-5-ylmethyl)phenoxyacetic acid (5.2 g) in methylene chloride (30 ml) was added triethylamine (5.1 ml) and 50% propylphosphonic acid cyclic anhydride in ethyl acetate (12.7 g) and the mixture was stirred at the same temperature for 2 hours. At the end of this time to the reaction mixture was added 5% aqueous sodium hydrogencarbonate solution and the mixture was extracted with methylene chloride. The extract was washed with water and diluted hydrochloric acid and concentrated in vacuo. To the residue was added methanol (40 ml) and the precipitated crystals were filtered to give the title compound (7.3 g, yield 85%). IR spectrum (KBr, nu cm-1): 3323, 1751, 1697, 1534, 1510, 1232, 1153. 1H-NMR spectrum (DMSO-d6, 400 MHz, delta ppm): 1.28(9H, br.s), 3.02(3H, s), 3.07(1H, dd, J=14.0, 9.1 Hz), 3.31(1H, dd, J=14.0, 4.3 Hz), 3.74(3H, s), 4.65(2H, s), 4.87(1H, dd, J=9.1, 4.3 Hz), 6.80-6.95(2H, m), 6.92(2H, d, J=8.5 Hz), 7.19(2H, d, J=8.5 Hz), 7.69(1H, br.s), 8.95(1H, br.s), 12.00(1H, br.s).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-(4-((2,4-Dioxothiazolidin-5-yl)methyl)phenoxy)acetic acid, you can also browse my other articles.

Reference£º
Patent; SANKYO COMPANY, LIMITED; US2003/8907; (2003); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

179087-93-5, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.179087-93-5, name is 2-(4-((2,4-Dioxothiazolidin-5-yl)methyl)phenoxy)acetic acid, below Introduce a new synthetic route.

Step 2-1-(1,1-dioxo-isothiazolidin-2-ylmethyl)-3-benzyl-5-bromo-benzene (8B) A mixture of 8A (5 g, 14.7 mmol), 1,3-propanesultam (3.6 g, 29.7 mmol) and potassium carbonate (4.1 g, 29.7 mmol) in acetonitrile (60 mL) was refluxed overnight. The solvent was removed under reduced pressure. The residue was partitioned between ethyl acetate and brine. The organic phase was dried over sodium sulfate, filtered and concentrated under reduced pressure. The residue was purified by flash chromatograph (ethyl acetate/hexanes) to give 8B as a white solid.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 5908-62-3, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Zhuang, Linghang; Wai, John S.; Payne, Linda S.; Young, Steven D.; Fisher, Thorsten E.; Embrey, Mark W.; Guare, James P..; US2005/10048; (2005); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

Under a nitrogen atmosphere, a solution of 5-bromo-6-chloro-pyridine-2-carboxylic acid methyl ester (Example 9 c, 1 g, 4 mmol), isothiazolidine 1,1-dioxide (730 mg, 06 mmol), copper(I) iodide (150 mg, 0.8 mmol), 1,3-di(pyridin-2-yl)propane-1,3-dione (CAN 10198-89-7, 180 mg, 0.8 mmol) and potassium carbonate (1.1 g, 8 mmol) in DMF (20 mL) was reacted for 24 h at 110 C. The reaction mixture was poured into water, and extracted with ethyl acetate (3¡Á50 mL). The combined organic extracts were washed with water and brine, dried over anhydrous sodium sulfate and evaporated. The residue was purified by column chromatography (silica gel, 4 g, 10% ethyl acetate in petroleum ether) to yield the title compound (0.048 g, 1.6 mmol, 41.4%) as yellow solid; MS (EI): m/e=291.0 [M+H]+.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,1-Dioxo-isothiazolidine, you can also browse my other articles.

Reference£º
Patent; Bissantz, Caterina; Grether, Uwe; Hebeisen, Paul; Kimbara, Atsushi; Liu, Qingping; Nettekoven, Matthias; Prunotto, Marco; Roever, Stephan; Rogers-Evans, Mark; Schulz-Gasch, Tanja; Ullmer, Christoph; Wang, Zhiwei; Yang, Wulun; US2012/316147; (2012); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, you can also browse my other articles.

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

General procedure: Thiazolidin-2-ylidene-cyanamide (0.317 g, 2.50 mmol) inacetonitrile (20 mL) was dropwise added to a stirred solutionof substituted benzyl bromide (2.5 mmol) and 14 mL NaOHaqueous solution (1 M). The mixture is stirred at room temperaturefor 8-10 h. The soild was collected by filtration,washed with n-hexane and dried in vacuo.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-Cyanoimino-1,3-thiazolidine, you can also browse my other articles.

Reference£º
Article; Jia, Ai-Quan; Ma, Sen; Wang, Jun-Ling; Zhang, Qian-Feng; Journal of Chemical Crystallography; (2020);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com