Heterocyclic Building Blocks-Thiazolidine

A common heterocyclic compound, the thiazolidine compound, name is 2-Cyanoimino-1,3-thiazolidine,cas is 26364-65-8, mainly used in chemical industry, its synthesis route is as follows.

Add 0.01 mol (1.28 g) to a 250 mL three-necked bottle2-cyanoimido-1,3-thiazolidine, 100 mL DMF as solvent,0.011 mol (1.52 g) of potassium carbonate as an acid binding agent, and the temperature was raised to 80 C.Stir for half an hour, then add 0.01mol (2.73g)5-(Chloromethyl)-3-(2-(2,2-difluoroethoxy)phenyl)-1,2,4-oxadiazole,Insulation reaction for 4h,TLC traces to the disappearance of the starting point and cools to room temperature.After adding 100 mL of water, stirring was continued, and a solid was precipitated and suction filtered to obtain a crude product, which was recrystallized from methanol.The compound of formula I [5-((2-cyanoimino-1,3-thiazolyl)methyl)-3-(2-(2,2-difluoroethoxy)phenyl-1,2 , 4-oxadiazole] 3.0g, yield 82.1%,

26364-65-8, As the rapid development of chemical substances, we look forward to future research findings about 26364-65-8

Reference£º
Patent; Qingdao University of Science and Technology; Xu Liangzhong; Liu Liancai; Hu Rao; Cui Huanqi; Wang Minghui; (7 pag.)CN108794462; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.,5908-62-3

7 mg (0.03 mmol) of palladium(II) acetate and 18 mg (0.03 mmol) of Xantphos were stirred in 3.6 ml of dioxane under an argon atmosphere at 20 C. for 10 minutes. Then 150 mg (0.3 mmol) of the compound from Example 72A, 74 mg (0.06 mmol) of 1,3-propane sultam and 148 mg (0.46 mmol) of caesium carbonate were added and the mixture was stirred at 110 C. for 6 h. After cooling down to 23 C., the mixture was purified via preparative HPLC (eluent: acetonitrile/water gradient with 0.1% formic acid). This gave 95 mg (51% of theory) of the title compound. LC-MS (Method 1): Rt=1.15 min; m/z=579.2 [M+H]+. 1H-NMR (400 MHz, DMSO-d6) delta [ppm]: 1.156 (4.54), 1.174 (8.71), 1.192 (4.39), 1.987 (16.00), 2.297 (4.76), 2.314 (6.89), 2.331 (5.14), 3.577 (4.62), 3.590 (8.77), 3.606 (8.06), 3.634 (2.43), 4.020 (4.03), 4.037 (3.96), 4.815 (3.11), 4.827 (3.16), 4.845 (3.08), 4.859 (2.88), 7.325 (3.46), 7.334 (7.37), 7.356 (6.87), 7.380 (2.99), 7.399 (5.75), 7.420 (4.45), 7.526 (13.43), 7.546 (9.83), 7.555 (3.20), 7.811 (2.87), 7.826 (2.86), 8.595 (6.46), 8.617 (6.25), 8.754 (11.28), 10.157 (2.54), 10.171 (4.84).

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bayer Pharma Aktiengesellschaft; TELLER, Henrik; STRAUB, Alexander; BRECHMANN, Markus; MUeLLER, Thomas; MEININGHAUS, Mark; NOWAK-REPPEL, Katrin; TINEL, Hanna; MUeNTER, Klaus; FLIEGNER, Daniela; MONDRITZKI, Thomas; BOULTADAKIS ARAPINIS, Melissa; MARQUARDT, Tobias; VAKALOPOULOS, Alexandros; REBSTOCK, Anne-Sophie; WITTWER, Matthias Beat; (342 pag.)US2018/297994; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5908-62-3, PREPARATION 19 STR75 (This is an alternative to the method of Preparation 2). A mixture of 4-vinylpyridine (324 g), isothiazolidine-1,1-dioxide (373 g), and “Triton B” solution (129 ml, 40% w/v in methanol) was heated in D.M.F. at 50-55 for 7 hours. The reaction mixture was then concentrated under vacuum, water (2.52 liters) was added, and the product was extracted into CH2 Cl2 (3*1.87 liters). The combined methylene chloride extracts were washed with water and then evaporated to dryness. The residue was dissolved in ethyl acetate (1.3 liters) at 35 and hexane (0.87 liters) was added over 10 minutes. The resulting crystalline product was granulated at -5 to 0 for 4 hours, filtered, washed with hexane (0.37 liters) and dried in vacuum at 25, to give 2-[2-(4-pyridyl)ethyl]isothiazolidine-1,1-dioxide (518 g). The material was confirmed by n.m.r., i.r. and m.p. to be identical in all respects to the product of Preparation 2.

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer Inc.; US4489075; (1984); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7025-19-6,3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid,as a common compound, the synthetic route is as follows.,7025-19-6

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

As the paragraph descriping shows that 7025-19-6 is playing an increasingly important role.

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.,5908-62-3

A microwave vial was charged with (5-{7-chloro-6-fluoro-5-[(S)-oxan-4- yl(phenyl)methyl]-5H-pyrido[3,2-b]indol-3-yl}-4-(2H3)methyl-l-methyl-lH-l,2,3- triazole (30 mg, 0.061 mmol), isothiazolidine 1,1-dioxide (11.1 mg, 0.091 mmol), tripotassium phosphate (18.1 mg, 0.085 mmol), Pd2(dba)3 (2.8 mg, 3.0 muiotatauiotaomicron), 2-di-tert- butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-l, -biphenyl (2.9 mg, 6.1 mumol), and dry tert-butanol (0.5 mL). The reaction was heated at 84C overnight. It was diluted with water and extracted with ethyl acetate. The organic layer was concentrated and purified by preparative HPLC (Column: XBridge CI 8, 19 x 200 mm, 5-muiotatauiota particles; Mobile Phase A: 5:95 acetonitrile: water with 10-mM ammonium acetate; Mobile Phase B: 95:5 acetonitrile: water with 10-mM ammonium acetate; Gradient: 15-55% B over 15 min, then a 5-min hold at 100% B; Flow: 20 mL/min) to give 2.1 mg (6%). NMR (500 MHz, DMSO) delta 8.61 (s, 1H), 8.11 (m, 1H), 7.96 (s, 1H), 7.64 (m, 2H), 7.45 (m, 1H), 7.35 (m, 2H), 7.28 (m, 1H), 5.91 (m, 1H), 3.9 (m, 5H), 3.77 (m, 1H), 3.52 (m, 3H), 3.29 (m, 1H), 2.55 9m, 2H), 1.78 (m, 1H), 1.35 (m, 2H), 1.1 (m, 1H); LCMS (M+H) = 578.35

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; HAN, Wen-Ching; DEGNAN, Andrew P.; DESKUS, Jeffrey A.; GAVAI, Ashvinikumar V.; GILL, Patrice; SCHMITZ, William D.; STARRETT, John E., Jr.; (193 pag.)WO2016/183115; (2016); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

7025-19-6,3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, cas is 7025-19-6, it is a common heterocyclic compound, the thiazolidine compound, its synthesis route is as follows.

General procedure: To a mixture of 5-chloroisatin (182 mg, 1.0 mmol) and N-carboxyethylrhodanine (205 mg, 1.0 mmol) was added DMSO-d6 (3.0 mL). The reaction was followed by proton NMR until the disappearance of the starting material.

As the rapid development of chemical substances, we look forward to future research findings about 7025-19-6

Reference£º
Article; Xue, Fengtian; MacKerell Jr., Alexander D.; Heinzl, Geoffrey; Hom, Kellie; Tetrahedron Letters; vol. 54; 13; (2013); p. 1700 – 1703;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

7025-19-6,3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, cas is 7025-19-6, it is a common heterocyclic compound, the thiazolidine compound, its synthesis route is as follows.

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

As the rapid development of chemical substances, we look forward to future research findings about 7025-19-6

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A common heterocyclic compound, the thiazolidine compound, name is Thiazolidin-2-one,cas is 2682-49-7, mainly used in chemical industry, its synthesis route is as follows.

EXAMPLE 1 Preparation of 3-(2-cyanophenylmethyl)-2-thiazolidinone A mixture containing 3.09 g (0.03 mol) of 2-thiazolidinone, 11.2 g (0.081 mol) of potassium carbonate, 1.8 g (0.018 mol) of potassium hydrogen carbonate, 0.5 ml (0.027 mol) of water and 6.47 g (0.033 mol) of 2-bromomethylbenzonitrile in 30 ml of methyl isobutyl ketone is refluxed for 5 hours, then cooled down. After adding 30 ml of water the mixture is stirred for 30 minutes, the insoluble precipitate is filtered off, washed twice with 10 ml of water each and dried. After recrystallizing 4.71 g of crude product from 20 ml of ethanol under simultaneous clarification with activated carbon 3.39 g (51.8%) of white, crystalline title compound are obtained, m.p.: 116-117 C., 2682-49-7

As the rapid development of chemical substances, we look forward to future research findings about 2682-49-7

Reference£º
Patent; Richter Gedeon Vegyeszeti Gyar RT; US5169859; (1992); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A common heterocyclic compound, the thiazolidine compound, name is 1,1-Dioxo-isothiazolidine,cas is 5908-62-3, mainly used in chemical industry, its synthesis route is as follows.

5908-62-3, A stirred mixture of [3-(2-Methyl-l,3-dioxolan-2-yl)tricyclo[3.3.1.03’7]non-l-yl] methyl methanesulfonate as obtained in preparation 2 (1.0 g, 2.9 mmol), K2CO3 (1.16 g, 8.7 mmol) and isothiazolidine- 1,1 -dioxide (0.53 g, 4.35 mmol) in DMF (12.0 mL) was heated to 110C for 16 h. The reaction mixture was cooled to room temperature, diluted with water and extracted with EtOAc. The combined organic layer was washed with brine, dried over Na2SO4 and the solvent was removed under reduced pressure. The crude product was purified by column chromatography to obtain 2-{[3-(2-methyl-l,3-dioxolan-2- yl)tricyclo[3.3.1.03’7]non-l-yl] methyljisothiazolidine 1,1-dioxide as a viscous liquid (0.69 g) in 70% yield, m/z (M+l) 342; 1H NMR (CDCl3) 300 MHz delta 4.04-3.92 (m, 4H), 3.30 (t, J= 6.8 Hz, 2H), 3.10 (t, J= 7.4 Hz, 2H), 2.94 (d, J= 14.6 Hz, IH), 2.87 (d, J= 14.6 Hz, IH), 2.40-2.27 (m, 4H), 1.88-1.72 (m, 2H), 1.72-1.55 (m, 4H), 1.55-1.38 (m, 4H), 1.27 (s, 3H).

As the rapid development of chemical substances, we look forward to future research findings about 5908-62-3

Reference£º
Patent; MATRIX LABORATORIES LTD.; WO2007/113634; (2007); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

1438-16-0, 3-Aminorhodanine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: O-phenylenediamines (0.065 mol) was heated with N-aminorhodanine (0.065 mol) in xylene (50 ml) for 5 hours. The obtained residue was filtered and was crystallized from aqueous alcohol (charcoal). The obtained solid was recrystallized in ethanol., 1438-16-0

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; El Kihel; Ait Sir; Jebbari; Ahbala; Guesmi; Bauchat; Oriental Journal of Chemistry; vol. 32; 4; (2016); p. 1765 – 1768;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com