Tag: M.W:100-200

26364-65-8, 2-Cyanoimino-1,3-thiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a dry 50 mL single-mouth flask, 10 mmol of 2-cyanoimino-1,3-thiazolidine and 5 mL of acetone were added.In an ice bath, 0.32 mL of a 50% aqueous solution of NaOH was added, and the temperature was controlled at 0C to 5C.Add dropwise a solution of 5-(2,4-difluorophenyl)-2-furanoyl chloride in acetone to control the rate ofThe temperature was kept at 0C-5C; after the addition was completed, the reaction was performed at 0C-5C for 1-2 hours and TLC test.After the reaction is completed, a 4mol/L hydrochloric acid solution is added to adjust the pH to neutrality.Dichloromethane extraction was added and the dichloromethane layer was successively saturated with sodium bicarbonate,Saturated brine and water were washed three times. The dichloromethane layer was dried over anhydrous magnesium sulfate and filtered.The compound was isolated using a silica gel column (eluent: a 2:1 volume ratio of petroleum ether to ethyl acetate).Yield 75%

26364-65-8, 26364-65-8 2-Cyanoimino-1,3-thiazolidine 3700797, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; South China Agricultural University; Cui Zining; Xiang Xuwen; Tao Hui; Jiang Shan; Zhang Lianhui; (19 pag.)CN107674070; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5908-62-3

General procedure: Example 2 3-Ethyl-5-methyl-6-[(2-oxoazetidin-1-yl)methyl]-1-(3,3,3-trifluoropropyl)thieno[2,3-d]pyrimidine-2,4(1H,3H)-dione To a solution of 85 mg (1.19 mmol) of 2-azetidinone in 1.6 ml of THF were added 48 mg (1.19 mmol) of sodium hydride (60% suspension in mineral oil), then the mixture was heated to 60 C. for 60 min and subsequently cooled back down to RT (“Solution 1”). To a solution of 80 mg (0.238 mmol) of the compound from Ex. 140A in 1.6 ml of dichloromethane in another reaction vessel were added, at 0 C., 83 mul (0.476 mmol) of N,N-diisopropylethylamine and 18 mul (0.250 mmol) of thionyl chloride. After 20 min at 0 C., Solution 1 was added and the cooling bath was removed. The reaction mixture was stirred at RT for about 18 h. All the volatile constituents were then removed on a rotary evaporator. The remaining residue was separated into its components by means of preparative HPLC (Method 10). After concentration of the product fractions and drying under high vacuum, 5 mg (5% of theory, 92% purity) of the title compound were obtained. 1H-NMR (400 MHz, DMSO-d6, delta/ppm): 4.26 (s, 2H), 4.12 (t, 2H), 3.90 (q, 2H), 3.29-3.21 (m, 2H), 3.17 (t, 2H), 2.86-2.69 (m, 2H), 2.41 (s, 3H), 2.29-2.16 (m, 2H), 1.12 (t, 3H). LC/MS (Method 1, ESIpos): Rt=0.96 min, m/z=440 [M+H]+.

5908-62-3 1,1-Dioxo-isothiazolidine 642157, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HAeRTER, Michael; KOSEMUND, Dirk; DELBECK, Martina; KALTHOF, Bernd; WASNAIRE, Pierre; SUessMEIER, Frank; LUSTIG, Klemens; (369 pag.)US2018/65981; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.,1438-16-0

General procedure: Compound 2 (100 mg, 0.5 mmol) and 2,4-thiazolidinedione or 2-thione-4-thiazolidinone derivatives (0.5 mmol) were dissolved in ethanol (5 mL). Piperidine (100 muL) was added as a catalyst and the reaction mixture was stirred at room temperature for 5 h. Then, the reaction mixture was poured into iced water to yield a precipitate. The product was filtered, washed with distilled water and recrystallized from the indicated solvents to yield compounds 3a-f.

1438-16-0 3-Aminorhodanine 74033, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Anh, Hoang Le Tuan; Cuc, Nguyen Thi; Tai, Bui Huu; Yen, Pham Hai; Nhiem, Nguyen Xuan; Thao, Do Thi; Nam, Nguyen Hoai; Van Minh, Chau; Van Kiem, Phan; Kim, Young Ho; Molecules; vol. 20; 1; (2015); p. 1151 – 1160;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

26364-65-8, 2-Cyanoimino-1,3-thiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

11.8 g (0.05 mL) of Compound X, 150 mL of DMF, 8.28 g (0.05 mL) of K2CO3 and 6.35 g of thiazolidine were added to a 150 mL three-necked flask, and reacted at 80 C for 4 h.Compound X disappeared by TLC. Filter by suction, take the filtrate, add 300mL after coolingWater, a large amount of solids are precipitated, stirred for a while, and then filtered.The filter cake is the product compound I. After drying, 14.15 g of a white solid was obtained, yield 86%., 26364-65-8

The synthetic route of 26364-65-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Qingdao University of Science and Technology; Xu Liangzhong; Zhang Mingming; Sun Jianxin; Wang Minghui; (6 pag.)CN108440519; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.26364-65-8,2-Cyanoimino-1,3-thiazolidine,as a common compound, the synthetic route is as follows.,26364-65-8

Under nitrogen protection, add 25g (0.197mol) HRB-1365-2 to the three-necked bottle.(2-cyanoimino-1,3-thiazolidine molecular formula: C4H5N3S) compound, adding 300 mL of methanol,With stirring, 23 g of triethylamine was added, and 26 g (0.230 mol) was added.Compound HRB-1365-1 (Cysteamine molecular formula:C2H7NS), stir the reaction at room temperature for four hours,After LC-MS was monitored, the methanol was distilled off under reduced pressure and the solid was filtered.The solid distilled water was washed with 50 ml, and dried to obtain a white solid HRB-1365 (amino thiol thiazoline molecular formula: C6H9N3S2) 16 g,

As the paragraph descriping shows that 26364-65-8 is playing an increasingly important role.

Reference£º
Patent; Yang Wenmao; (12 pag.)CN103387550; (2016); B;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5908-62-3

A sealed tube was charged with 4-iodobenzonitrile (0.50 g, 2.2 mmol), 1 ,2-thiazolidine 1 , 1- dioxide (1.2 equiv.; 0.32 g, 2.6 mmol), dimethylethylenediamine (0.1 equiv., 0.23 mL, 0.22 mmol), cesium fluoride (2.5 equiv., 0.83 g, 5.47 mmol), copper iodide (0.05 equiv., 0.02 g, 0.10 mmol), tetrahydrofuran (4.7 mL) and the reaction contents were stirred at room temperature for 24 hours. The reaction contents were diluted with ethyl acetate and a saturated aqueous ammonium chloride solution. The layers were separated and the organic fraction was washed with water, dried over sodium sulfate, and concentrated under reduced pressure. The corresponding crude yellow oil (449 mg) was taken up in the next step without additional purification or characterization. (0600) NMR (400 MHz, CDCIs) delta ppm: 7.85 (d, 2H), 7.30 (d, 2H), 3.82 (t, 2H), 3.28 (t, 2H), 3.30 (m, 2H).

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SYNGENTA PARTICIPATIONS AG; HOFFMAN, Thomas, James; STIERLI, Daniel; POULIOT, Martin; BEAUDEGNIES, Renaud; (96 pag.)WO2017/93348; (2017); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.26364-65-8,2-Cyanoimino-1,3-thiazolidine,as a common compound, the synthetic route is as follows.

General procedure: Thiazolidin-2-ylidene-cyanamide (0.317 g, 2.50 mmol) inacetonitrile (20 mL) was dropwise added to a stirred solutionof substituted benzyl bromide (2.5 mmol) and 14 mL NaOHaqueous solution (1 M). The mixture is stirred at room temperaturefor 8-10 h. The soild was collected by filtration,washed with n-hexane and dried in vacuo.

26364-65-8, 26364-65-8 2-Cyanoimino-1,3-thiazolidine 3700797, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Jia, Ai-Quan; Ma, Sen; Wang, Jun-Ling; Zhang, Qian-Feng; Journal of Chemical Crystallography; (2020);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.,5908-62-3

Step 2-1-(1,1-dioxo-isothiazolidin-2-ylmethyl)-3-benzyl-5-bromo-benzene (8B) A mixture of 8A (5 g, 14.7 mmol), 1,3-propanesultam (3.6 g, 29.7 mmol) and potassium carbonate (4.1 g, 29.7 mmol) in acetonitrile (60 mL) was refluxed overnight. The solvent was removed under reduced pressure. The residue was partitioned between ethyl acetate and brine. The organic phase was dried over sodium sulfate, filtered and concentrated under reduced pressure. The residue was purified by flash chromatograph (ethyl acetate/hexanes) to give 8B as a white solid.

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zhuang, Linghang; Wai, John S.; Payne, Linda S.; Young, Steven D.; Fisher, Thorsten E.; Embrey, Mark W.; Guare, James P..; US2005/10048; (2005); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.,1438-16-0

Procedure B. To a solution of RhA-8 (300 mg, 1.09 mmol) in ethanol(10 mL) was added slowly a solution of 3-amino-2-thioxothiazolidin-4-one (2, 158.2 mg, 1.09 mmol) in ethanol and was added to acetic acid(2 drops) as a catalyst. The reaction mixture was refluxed for 8 h, andwas monitored by TLC. After the completion of the reaction, the mixturewas cooled to room temperature. The red product formed wasrecrystallized from ethanol, filtered, and dried in vacuo. After recrystallization,4 (382 mg, 87%) was obtained as red solid(Mp:>300 C). 1H NMR (400 MHz, DMSO-d6): delta 12.41 (bs, NH, 1H),12.08 (bs, NH, 1H), 8.82 (s, N=CH, 1H), 8.22 (d, J=7.7 Hz, =CH,1H), 8.14-8.13 (m, =CH, 2H), 8.00-7.97 (m, =CH, 2H), 7.54-7.52 (m,=CH, 2H), 7.31-7.22 (m, =CH, 3H), 5.96 (s, =CH, 1H); 13C NMR(100 MHz, DMSO-d6): delta 206.9, 171.1, 165.7, 157.0, 147.8, 144.8,138.2, 137.3, 136.4, 135.6, 135.1, 130.7, 126.7, 124.2, 123.4, 122.3,121.6, 113.3, 112.6, 111.2, 110.3 (Fig. S9); IR (KBr, cm-1): 3242 cm-1 (=CeH), 1729 cm-1 (C]O), 1612 cm-1 (O]C-N-C]S), 1414,1315 cm-1 (C]S); ESI-MS (m/z) [M] calcd for C21H14N4OS2 402.49,found: 402.12.

As the paragraph descriping shows that 1438-16-0 is playing an increasingly important role.

Reference£º
Article; Bayindir; Caglayan, Cuneyt; Karaman, Muhammet; Guelcin, ?lhami; Bioorganic Chemistry; vol. 90; (2019);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.,5908-62-3

1,2-thiazolidine 1,1-dioxide (0.03 I g, 0.259 mmol) in dimethylformamide (1 mL) was treated with 60% sodium hydride (0.012g, 0.518 mmol, 0.021 g of a 60% in oil dispersion).The reaction mixture was stirred for 5 mm. To this solution was added Example 41b (0.05 g,0.086 mmol). The reaction mixture was stirred at room temperature for 2 hours. 2 N NaOH (1 mL) was added and the reaction mixture was heated at 65 C for 2 hours. After cooling to room temperature, the reaction mixture was partitioned between water and ethyl acetate. The aqueous layer was extracted with additional ethyl acetate twice. The combined organic layerswere washed with brine, dried over MgSO4, filtered, and concentrated. The residue was purified by preparative HPLC (C18, 10-80% acetonitrile in 0.1% TFA water) to afford 0.025 g (64%) of the title compound. 1H NMR (500 MHz, DMSO-d6) 2.21-2.25 (m, 2H), 3.15 (t, J=6.97 Hz, 2H), 3.23-3.27 (m, 2H), 3.50 (s, 3H), 4.13 (s, 2H), 6.25-6.26 (m, IH), 6.88 (d, J=7.63 Hz, 2H), 7.00 (d, J8.54 Hz, 1H), 7.03-7.05 (m, IH), 7.25-7.30 (m, 4H), 7.34 (dd,J=8.39, 2.29, ZH), 7.48 (d, J=2.44 Hz, 1H), 12.00 (s, 1 H). MS (ESI+) m/z 450.2 (M+H).

5908-62-3 1,1-Dioxo-isothiazolidine 642157, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; ABBOTT LABORATORIES; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; WANG, Le; PRATT, John, K.; MCDANIEL, Keith, F.; WO2013/97052; (2013); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com